Lab. Safety Questions Due on 8/12
Please answer all five of the following questions for laboratory safety.
1. Describe how you would pick up a piece of hot glass in the lab.
2. How would you hold a test tube containing a chemical?
3. When would you report an injury, glass break, or chemical spill?
4. Name a piece of equipment that is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
Short URL: http://chandadavis.net/?p=2244
1. always use gloves and tongs.
2.with tongs and away from anyone.
3. immediately
4. bunsen burner
5.graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
With gloves and tongs
2. How would you hold a test tube containing a chemical?
Point it away from anyone, and hold it with tongs so it doesn’t burn my hands off or something.
3. When would you report an injury, glass break, or chemical spill?
Immediately
4. Name a piece of equipment that is a source of heat in the laboratory.
Bunsen Burner
5. Which equipment have specific markings for accurate measurement for
liquid volume?
Graduated Cylinder
You would wear gloves and and use tongs.
You would hold a test tube with chemicals away from your face.
Immediately
Busen Burner
Graduated Cylinder
1) If I were to pick up a hot piece of glass in the lab, I would use heat-resistant gloves and tongs.
2) You would hold a test tube containing a chemical away from your/your partners face.
3) You would report an injury, glass break, or chemical spill immediately.
4) A piece of equipment that is a source of heat in the labratory is the bunsen burner.
5) The equipment that has special markings for accurate measurement of liqiud volume is the graduated cylinder.
1. with gloves and tongs
2. by the neck
3. immediatly
4. bunsen burner
5. graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
With tongs and gloves.
2. How would you hold a test tube containing a chemical?
With test tube tongs.
3. When would you report an injury, glass break, or chemical spill?
Immediately.
4. Name a piece of equipment that is a source of heat in the laboratory.
Bunson burner.
5. Which equipment have specific markings for accurate measurement for liquid volume?
Graduated Cylinder.
1.I would pick up a piece of hot glass with tongs or gloves.
2.I would hold the test tube away from me and everybody around me.
3.I would report an injury immediately.
4.A piece of equipment is the Bunsen Burner.
5.Graduated Cylinder.
1. Describe how you would pick up a piece of hot glass in the lab?
Tongs and gloves should be used to pick up a piece of hot glass.
2. How would you hold a test tube containing a chemical?
You would hold the test tube away from your face and your partners.
3. When would you report an injury, glass break, or chemical spill?
Call for your teacher for teacher so she can assist you.
4. Name a piece of equipment that is a source of heat in the laboratory.
A bunsen burner is a source of heat in the lab.
5. Which equipment have specific markings for accurate measurement for liquid volume?
A graduated cylinder has specific markings for measurement of liquid volume.
1. I would pick up a piece of hot glass in the lab the tongs.
2. You hold a test tube containing a chemical pointing away from yourself.
3. Right away to your teacher
4. Bunsen Burner
5. Graduated Cylinder
1. All hot objects should be handled with clamps or tongs.
2. Hold the test tube away from yourself and anyone else.
3. Immediately after the accident happens.
4. Bunsen burner
5. Erlenmeyer Flask and graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
With the tongs or with heat proof gloves.
2. How would you hold a test tube containing a chemical?
with the opening pointing up and held very steadily.
3. When would you report an injury, glass break, or chemical spill?
immediately.
4. Name a piece of equipment that is a source of heat in the laboratory.
Benson Burner.
5. Which equipment have specific markings for accurate measurement for liquid volume?
graduated cylinder, Beaker,Erlenmeyer Flask, Test tube
1. Describe how you would pick up a piece of hot glass in the lab.
With Tongs and Gloves.
2. How would you hold a test tube containing a chemical?
Away from your face and your partners face.
3. When would you report an injury, glass break, or chemical spill?
Immediatly.
4. Name a piece of equipment that is a source of heat in the laboratory.
Bunsen Burner
5. Which equipment have specific markings for accurate measurement for liquid volume?
Graduated Cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
2. How would you hold a test tube containing a chemical?
3. When would you report an injury, glass break, or chemical spill?
4. Name a piece of equipment that is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
1. To pick up a piece of hot glass in the lab you would always use gloves and the correct tongs.
2. To hold a test tube containing a chemical you would also use gloves and tongs.
3. If an injury, glass break, or chemical spill ever happened you would report it immediately.
4. A piece of equipment that is a source of heat in the laboratory is the bunsen burner.
5. The piece of equipment that has specific markings for accurate measurement for liquid volume is a volumetric flask.
1. Describe how you would pick up a piece of hot glass in the lab.
Wear gloves and use tongs.
2. How would you hold a test tube containing a chemical?
by using test tube tongs.
3. When would you report an injury, glass break, or chemical spill?
as soon as it happens
4. Name a piece of equipment that is a source of heat in the laboratory.
bunsen burner
5. Which equipment have specific markings for accurate measurement for liquid volume? graduated cylinder
Describe how you would pick up a piece of hot glass in the lab.
Always use gloves and tongs.
2. How would you hold a test tube containing a chemical?
3. When would you report an injury, glass break, or chemical spill?
4. Name a piece of equipment that is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
1. You should wear gloves and use tongs that fit the certain hot glass.
2. Hold it up and away from you or someone around you.
3. As soon as it happens.
4. Wire gauze
5. Graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
1. you should always use protection gloves and tongs.
2. How would you hold a test tube containing a chemical?
2. you should use the appropriate tongs.
3. When would you report an injury, glass break, or chemical spill?
3. you should report an injury immediately when it happen.
4. Name a piece of equipment that is a source of heat in the laboratory.
4.A piece of equipment of a source of heat is a Bunsen Burner.
5. Which equipment have specific markings for accurate measurement for liquid volume?
5. Graduated cylinder.
1. Describe how you would pick up a piece of hot glass in the lab..
You would pick up hot glass with the correct tongs.
2. How would you hold a test tube containing a chemical?
You would your tongs and point it away from your face.
3. When would you report an injury, glass break, or chemical spill?
Report an injury or accident immediatly after it happens.
4. Name a piece of equipment that is a source of heat in the laboratory.
A Bunsen Burner is a source of heat in the lab.
5. Which equipment have specific markings for accurate measurement for liquid
volume?
A Graduated cyliner shows accurate mearsurements.
1) always wear gloves and use tongs.
2) you would hold it up at a slight angle pointed away from yourself and away from others
3) you would report these ASAP!
4) the Bunsen Burner
5) graduated cylinders
1. Always be sure to wear gloves and use tongs
2.Hold it with a tong and pointed away from your face
3.Immediatley after it happened, right away
4.A Bunsen Burner
5.A graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
with heat resistant gloves and tongs
2. How would you hold a test tube containing a chemical?
away from you and others, and with tongs
3. When would you report an injury, glass break, or chemical spill?
as soon as possible
4. Name a piece of equipment that is a source of heat in the laboratory.
bunsen burner
5. Which equipment have specific markings for accurate measurement for liquid volume?
gradutated cylinder
. Describe how you would pick up a piece of hot glass in the lab.
~I would pick up the hot glass using tongs.
2. How would you hold a test tube containing a chemical?
~I would hold the test tube away from my face, using tongs.
3. When would you report an injury, glass break, or chemical spill?
~Immediately after the injury, glass break, or chemical spill happens.
4. Name a piece of equipment that is a source of heat in the laboratory.
~A Bunsen Burner is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
~The Graduated cylinder has specific markings for accurately measuring volume.
1. Describe how you would pick up a piece of hot glass in the lab.
With heat resistance gloves.
2. How would you hold a test tube containing a chemical?
You should hold it away from your face.
3. When would you report an injury, glass break, or chemical spill?
You should report all three of those immediately.
4. Name a piece of equipment that is a source of heat in the laboratory.
The Bunsen burner
5. Which equipment have specific markings for accurate measurement for liquid volume?
A graduated cylinder
1. Always wear gloves and use tongs and also wear safety goggles.
2. I would never hold or face a test tube with chemichal tource my face or somebody else.
3. I would reported right after it happen.
4. Erlenmeyer Flask.
5. Beaker.
1. Describe how you would pick up a piece of hot glass in the lab.
using thongs and gloves.
2. How would you hold a test tube containing a chemical?
Away from your face, not toward your partners face either.
3. When would you report an injury, glass break, or chemical spill?
Right after it happens.
4. Name a piece of equipment that is a source of heat in the laboratory.
Bunsen Burner
5. Which equipment have specific markings for accurate measurement for liquid volume?Graudated Cylinder
1. Describe how you would pick up a piece of hot glass in the lab. You would use a clamp or tongs to pick up a piece of hot glass.
2. How would you hold a test tube containing a chemical? You would hold a test tube containing a chemical pointed away from yourself or anyone else.
3. When would you report an injury, glass break, or chemical spill? Immediately
4. Name a piece of equipment that is a source of heat in the laboratory. Bunsen Burner
5. Which equipment have specific markings for accurate measurement for liquid volume? Beaker and a graduated cylinder.
1. Describe how you would pick up a piece of hot glass in the lab. You would pick the hot glass up with tongs or heat resistant gloves.
2. How would you hold a test tube containing a chemical? You would hold the chemical with the right tongs and away from your face.
3. When would you report an injury, glass break, or chemical spill? You would report it immediately.
4. Name a piece of equipment that is a source of heat in the laboratory. A scorce of heat in the laboratory is the bunsen burnner.
5. Which equipment have specific markings for accurate measurement for liquid volume? The piece of equipment that has specific markings for accurate measurement is the graduated cylinder.
1) wear gloves and use tongs
2) very carefully
3) immediatly
4) bunsen burner
5) graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
– wear the heat resistant gloves or use the tongs made for the right job.
2. How would you hold a test tube containing a chemical?
– away from your face, body, and away from your partner.
3. When would you report an injury, glass break, or chemical spill?
– as soon as the spill, break or injury happens. Go straight to the teacher and follow directions.
4. Name a piece of equipment that is a source of heat in the laboratory.
– bunsen burner
5. Which equipment have a specific markings for accurate measurement for liquid volume?
– graduated cylinder
1. Wear gloves and use tongs.
2. Away from you and your parter(s).
3. Immediately after it happened.
4. Bunsen burner.
5. A graduated cylinder.
1. Describe how you would pick up a piece of hot glass in the lab.
You would use tongs and gloves.
2. How would you hold a test tube containing a chemical?
You would hold it pointed away from you and others.
3. When would you report an injury, glass break, or chemical spill?
As soon as it happens.
4. Name a piece of equipment that is a source of heat in the laboratory.
A bunsen burner
5. Which equipment have specific markings for accurate measurement for liquid volume?
Graduated Cylinder
1. with gloves or tongs held out in front of you
2. in your haand with your arm streched out so if it splashes it wont get in your eyes or your face
3. immediately
4. bunsen burner
5.graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
2. How would you hold a test tube containing a chemical?
3. When would you report an injury, glass break, or chemical spill?
4. Name a piece of equipment that is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
1.You will always use tongs to pick up a chemical
2. Hold it with tongs firmly.
3.You report it immediately
4.A bunsen burner is a source of heat in the laboratory.
5.The answer os a graduated cylinder.
1. you should either wear gloves or use tongs.
2. away from your face
3. imediatly you should report the incedent
4. bunsen burner
5. graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab. with tongs
2. How would you hold a test tube containing a chemical? away from your self and other people
3. When would you report an injury, glass break, or chemical spill? right away
4. Name a piece of equipment that is a source of heat in the laboratory. Bunsen burner
5. Which equipment have specific markings for accurate measurement for liquid volume? graduated cylinder
1.By putting on heat resistant gloves and using the correct tongues for the correct glass obj.
2.Cautisously
3.Right when it happens
4.Bunsen Burner
5.Graduated Cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
2. How would you hold a test tube containing a chemical?
3. When would you report an injury, glass break, or chemical spill?
4. Name a piece of equipment that is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
1. with tongs and wear gloves
2. with test tube tongs
3. immediately
4. bunsen burner
5. a graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
gloves and tongs
2. How would you hold a test tube containing a chemical?
an arms length away
3. When would you report an injury, glass break, or chemical spill?
immediately
4Name a piece of equipment that is a source of heat in the laboratory.
bunsen burner
5. Which equipment have specific markings for accurate measurement for liquid volume?
pipet
1. You would use the designated tongs for the certain piece of glass, so you wouldn’t burn yourself.
2. You hold it with test tube tongs, facing away from you!
3. IMMEDIATLY!!!!!!!!
4. A bunsen Burner is one source of heat in the labratory!
5. A beaker has specific markings for measurement!
1. Tongs and wear gloves
2. You would use test tube tongs
3. You would tell the teacher as soon as it happens.
4. Bunsen burner
5. Graduated cylinder
1. tongs or good gloves (heat resistant)
2. away from u and evry1 else
3.as fast as u can
4. bunsen burner
5. graduated cylinder
1 with tongs
2 with test tube tongs
3 immediately
4 a bunsen burner
5 a graduated cylinder has specific markings for measurement
1.use gloves and tongs
2.using tongs facing away from other people.
3.as soon as it happens
4.bunsen burner
5.graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab.
2. How would you hold a test tube containing a chemical?
3. When would you report an injury, glass break, or chemical spill?
4. Name a piece of equipment that is a source of heat in the laboratory.
5. Which equipment have specific markings for accurate measurement for liquid volume?
1. By wearing gloves and using thongs.
2. Using thongs pointing the test tube away from your face and others.
3. Immediatly
4. A Bunsen Burner
5. A graduated cylinder
1. Wear gloves and use tongs.
2. hold it away from yourself and others, using tongs.
3. Right away
4. Bunsen Burner
5. A graduated cylinder
1. You would wear gloves and use tongs.
2. Use tongs and hold it away from you.
3. Right after it happens.
4. Bunsen Burner
5. graduated cylinder
1. Describe how you would pick up a piece of hot glass in the lab. With heat resistant gloves.
2. How would you hold a test tube containing a chemical? With tongs.
3. When would you report an injury, glass break, or chemical spill? Immediately.
4. Name a piece of equipment that is a source of heat in the laboratory. Bunsen Burner.
5. Which equipment have specific markings for accurate measurement for liquid volume? Graduated cylinder.