Blog August 24th
What is the function of the diaphragm on the microscope?
Short URL: http://chandadavis.net/?p=1638
Recently Commented
- Noah Milchuck: 1. The biochemical cycle is a cycle in which elements are rotated through the biotic and abiotic...
- Noah Milchuck: 1. Humans exhale carbon dioxide. 2. The photosynthesis not being circulated will unbalance the oxygen...
- Collin Parker: 4. Because the reaction with the vitamins is at a molecular level, body doesn’t need a certain...
- Jenna Marshall: 1. Water cycle, describes the continuous movement of water on, above and below the surface of the...
- Jenna Marshall: 1. They cars that run on gas and pollinate the air. 2. It would lessen the amount of oxygen in the...
It used as a very important part to keep the stage blanced
The function of the diaphrgm is to vary the intensity and size of light that is projectod into the slide.
the diaphagm is the the thing that u would but the disk in under the tray
This diaphragm has different sized holes and is used to the intensity and size of the cone of light that is projected upward into the slide.
The function of the diaphragm is to adjust the lens for the objectives.
The function of the diaphragm on the microscope is a simple piece between the light source and the stage.
This diaphragm has different sized holes and is used to vary the intensity and size of the cone of light that is projected upward into the slide
the disk diaphram is underrneath the stage and I think that it is there so that you can rotate the slides in order to compare the different slides.
The disc diaphragm has different sized holes to project a certain amount of light on the slide.
The diaphragm is located under the stage. It has holes in it and it controls or determines the amount of light through the stage.
The disk diaphragm controls the amount of light that comes through the stage from the illuminator.
It controls the amount of light that comes through the stage from the illuminator
The Disk Diaphragm controls The amount of light that comes through the stage from the illuminator
8-26-09
i think the function of the disc diaphragm is to control the amount of light project from the illuminator.
The diaphragm is used to control the amount of light that goes through the stage.
The disk diaphragm, which is under the stage, has differents sized holes in it which are used to set the amount of light that is projected up into the slide.
The diaphragm is used to regulate how much light comes in.
The disk diaphram is under the stage.It has holes that lets light project out of the stage.
The diaphram controls how much light goes through the openings of the stage.
It changes the amount of light that’s let in under the slide.
The disk diaphram is under the stage. It also is the thing that lets light on the stage to have light to see the slider under the microscope.
The disk diaphram is under the stage. It also is the thing that lets light on the stage to have light to see the slider under the microscope. It is used for the light in the illuminater.
Hi Mrs. Davis.
The disk diaphram is used to change the different intensities for the objectives.
The dirphram has different sized holes that is used to vary the intensity and size of the cone of light that is projected upward into the slide. There is no set rule regarding which setting to use for a particular power.
the disc diaphfragm has holes that are different sizes that is used to vary the intensity and size of the cone of light that is projected upward into the slide.
the function of the diaphragm is diaphragm has different sized holes and is used to vary the intensity and size of the cone of light that is projected upward into the slide.
A disc diaphram is a object witch has holes in it and shows more light in each one .
what is the function of the diaphragm is diaphragm has different sized holes and is used to vary the intensity and size of the cone of light that is projected upward into the slide.
the thing that controlls how much light get to the thing being looked at
The diaphram controls the amount of light that goes through the stage.
The disk diaphragm is located underneath the stage. It has different sized holes, and its function is to regulate the amount of light.
The function of the disc diaphragm on the microscope is to help adjust how much light gets through the stage and goes to the slide.
the disk diaphram is is on the bottom of the stage and it to show a cetain a mount of lifght on each slid.
It controls how much light reaches the slide.
Is that it controls how much light comes
though the illuminator.
The diaphram is used to rotate 1 or more slides to observe from different angles
and/or look at a different slide.
THE FUNCTION OF THE DIAPHRAGM IS THE TO ADJUST THE LENS FOR THE OBJECTIVES.
The function of the diaphram is it changes how much light comes through the micrscope.
The diaphram controls the amount of light that passes through the stage.
It controls the amont of light.
The diaphragm increases or decreases the amount of lite that comes through the microscope.
the disk diaphragm’s job is to ajust how much light comes in the eye pice
The function is to control how much light comes in and out on the stage.
to control how much light comes through the stage
To control how much light comes through the stage.
it is used to determine the amount of light that goes through